The RCF VMAX V45 is a very high-output two-way full-range passive loudspeaker built around dual 15-inch low-frequency transducers and a large-format compression driver. Both LF drivers carry 4-inch voice coils on ferrite motors in a vented, front-loaded enclosure, while the 4-inch neodymium titanium compression driver loads onto a constant directivity CMD horn covering 90 x 40 degrees. Handling up to 1800W AES and reaching 137dB maximum SPL with response down to 30Hz, the V45 provides serious low-end authority and headroom for concerts, outdoor events, DJ sets and permanent installations. Its LICC (Low Impedance Compensated Crossover) minimizes phase shift for superior transient response, and bulb-lamp protection guards the HF section against overload. The birch plywood cabinet carries a weather-resistant textured finish behind an epoxy powder-coated grille, and its shape converts easily between standard front-of-house use and stage monitoring. M10 threaded inserts support optional rigging hardware, and a rugged steel pole mount sits in the base. For large churches, festivals and rental fleets in Kenya, the V45 anchors a powerful yet manageable PA system. Key Features: - Two-way bass-reflex passive full-range system - 2 x 15" hyper vented woofers with 4" voice coils - 4" titanium neodymium compression driver on 90° x 40° horn - 1800W AES power handling, up to 137dB maximum SPL - Response down to 30Hz - LICC crossover with dynamic HF protection - Convertible main/monitor cabinet shape - M10 rigging points and steel pole mount